How To Clean Computer Through Command Prompt

This article explains the Microsoft Diskpart Erase utility. The command that erases the bulldoze during this process is "Clean". In this article "Clean" and erase are used interchangeably. Cleaning or erasing a storage device removes all data and partitions from the drive.Critical Instructions:

Disclaimer: Seagate Technology, LLC is not responsible for lost user information. Exist sure to support whatever important information on this drive before proceeding.
This article explains the Microsoft Diskpart Erase utility. The command that erases the drive during this process is "Clean". In this commodity "Clean" and erase are used interchangeably. Cleaning or erasing a storage device removes all data and partitions from the drive.
Please read all steps, instructions, and warnings before attempting the Diskpart Erase/Clean.
Diskpart Erase/Make clean will permanently erase/destroy all data on the selected drive . Please make certain that yous are erasing the correct disk.
Remove all additional drives from the estimator excluding the drive you are booting from and the drive you desire to Erase/Make clean.

Items to note:

This commodity volition walk through the steps of using the Microsoft Diskpart Erase utility to Make clean the deejay of a previous partition and format, including any data on the drive. This command takes simply a few minutes to complete.
This article covers Diskpart Erasing a 3TB or larger bulldoze that has a Master Boot Tape (MBR) Segmentation tabular array, which is thereby limiting its capacity to 2TB. All the same, this article also applies to any scenario where a Diskpart Erase of an entire disk is necessary.
For more information regarding drives over 2TB and GPT/MBR segmentation tables please see the following articles.
- noesis.seagate.com/articles/en_US/FAQ/218619en
- http://www.seagate.com/support/downloads/across-2tb/

To decide the disk number assigned to the 3TB+ MBR partitioned drive follow the steps below.
1. From the Start carte du jour right click on Computer which will provide a drop down menu. (If you are on Windows 8 or 8.ane move your mouse to the lesser left mitt corner of the desktop screen and right click. And so select Disk Direction).
2. Choose Manage.
3. Select Disk Management (listed under Storage).
4. Look for the drive that is identified every bit the 3TB drive (2794GB). The backdrop window shows that the division table on the drive is MBR . Important: note the Disk number (such as Disk 1).
Open a Command Prompt window. To open up the Command Prompt on a Windows Vista or Windows seven machine click on Start and type cmd in the search bar. And then right click on cmd.exe and run every bit administrator. It volition prompt you with the bulletin, "Exercise you lot desire to allow the post-obit program to make changes to this computer," click yeah. A black Command Prompt window will open.

On Windows 8 move your mouse to the lesser left hand corner of the desktop screen and right click. Select Control Prompt (Admin) from the pop-up menu.

This is the Command Prompt window.
$Shows the command prompt window C:\Windows\system32>_ is the bottom line.$
From the command prompt, type diskpart and press Enter.

The diskpart prompt will open up.
From the diskpart prompt, type listing disk and press Enter.

A list of disks will appear in a text format. You will return to the diskpart prompt. Step i verified that Disk i is the 3TB bulldoze. Warning: Diskpart Erase/Clean volition permanently erase/destroy all data on the selected drive. Please be certain that you are erasing the correct disk.
From the diskpart prompt you volition demand to select a disk disk number (for instance, if the 3TB+ drive is Disk 1, you lot would type select disk 1) and press Enter. Warning: Diskpart Erase/Clean volition permanently erase/destroy all data on the selected drive. Please be certain that you are erasing the correct disk.

A bulletin appears proverb that the disk is selected. You will return to the diskpart prompt. Warning: Diskpart Erase/Clean will permanently erase/destroy all data on the selected drive. Please be sure that you are erasing the right deejay.
From the diskpart prompt, type clean and press Enter. The drive's partition, data, and signature is now removed. You will render to the diskpart prompt. Warning: Once yous blazon clean and hitting enter the bulldoze volition be erased. No alert will be provided.
The Command Prompt window will brandish the bulletin "DiskPart succeeded in cleaning the disk". Close out of the Control Prompt window by clicking the reddish X in the upper right manus corner.

At present the 3TB+ drive can exist re-initialized, partitioned, and formatted.